Search by features

• Guaranteed 0402 size 0.2W
• 50% rated power up than conventional resistors of the same size
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Improved rated power compared to conventional wide terminal products 0508 size 0.8W, 0612 size 1.25W
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Guaranteed 0603 size 0.3W, 0805 size 0.5W
• ±0.5 resistance tolerance is in lineup.
• ESD (new JASO condition) 15KV is applied, resistance change rate within 10% (actual value)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Load life in Humidity is much better than conventional chip resistors.
• Long time stability±0.2%
• Tolerrance on rated resistance ±0.1%
• TCR±50ppm/℃ (±25ppm/℃ is available depending on resistance value)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• The use of accurate resistive film printing technology and trimming has dramatically improved anti-pulse characteristics.
• Also guaranteed high rated power 0.60W
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Guaranteed 0603 size 0.3W, 0805 size 0.5W
• ±0.5 resistance tolerance is in lineup.
• ESD (new JASO condition) 15KV is applied, resistance change rate within 10% (actual value)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Improved rated power compared to conventional wide terminal products 0508 size 0.8W, 0612 size 1.25W
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• The use of a wide terminal type significantly improves the reliability of solder joints compared to short-side electrodes.
• Improved heat dissipation compared to short terminal type due to the long side electrodes.
• Improved anti-surge characteristics compared to the conventional long-side electrode product (RPW18)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Guaranteed low resistance value 10mΩ
• The use of a wide terminal type improves heat dissipation compared to short terminal type.
• Also guaranteed ±0.5% (resistance value on request)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• The use of a wide terminal type significantly improves the reliability of solder joints compared to short-side electrodes.
• Improved heat dissipation compared to short terminal type due to the long side electrodes.
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Improved rated power compared to conventional wide terminal products 0508 size 0.8W, 0612 size 1.25W
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Guaranteed 0603 size 0.3W, 0805 size 0.5W
• ±0.5 resistance tolerance is in lineup.
• ESD (new JASO condition) 15KV is applied, resistance change rate within 10% (actual value)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Guaranteed low resistance value 10mΩ
• The use of a wide terminal type improves heat dissipation compared to short terminal type.
• Also guaranteed ±0.5% (resistance value on request)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Load life in Humidity is much better than conventional chip resistors.
• Long time stability±0.2%
• Tolerrance on rated resistance ±0.1%
• TCR±50ppm/℃ (±25ppm/℃ is available depending on resistance value)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Guaranteed 0603 size 0.3W, 0805 size 0.5W
• ±0.5 resistance tolerance is in lineup.
• ESD (new JASO condition) 15KV is applied, resistance change rate within 10% (actual value)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• The use of a wide terminal type significantly improves the reliability of solder joints compared to short-side electrodes.
• Improved heat dissipation compared to short terminal type due to the long side electrodes.
• Improved anti-surge characteristics compared to the conventional long-side electrode product (RPW18)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Lineups from resistance tolerance ±0.5% to ±0.1%
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Used Gold flash plating for outside electrodes.
• These chip resistors are suitable for mounting with conductive adhesive.
• Can be mounted in high-temperature environments where solder materials cannot be used.
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

Special plated products are suggested for wire bonding or mounting with conductive adhesives, other than solder mounting and chip resistors that work with high power even in high temperature environments.

• This product is trimmable resistor by a laser trimmer.
• Saving space and lower cost by using trimmable resistor instead of semi-fixed resistor.
• With the high reliability in metal glaze,stable resistance value can be obtained even after the trimming.
• AEC-Q200 qualified (data available)
  A few products exempted. For further particulars, please make inquiries to us.

• High reliability metal thick film
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• This product is Jumper chip (0Ω).
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• 0805 size 0.25W
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Guaranteed 0805 size 0.25W
• ±0.5 resistance tolerance is in lineup.
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Lineup from 0.1Ω low resistance value
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified