Search by features

• Guaranteed 0402 size 0.2W
• 50% rated power up than conventional resistors of the same size
• The use of special inside termination contribute to high performance of anti-sulfuration.
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Improved rated power compared to conventional wide terminal products 1220 size 0.8W、1632 size 1.25W
• The use of special inside termination contribute to high performance of anti-sulfuration.
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Guaranteed 0603 size 0.3W, 0805 size 0.5W
• ±0.5 resistance tolerance is in lineup.
• ESD (new JASO condition) 15KV is applied, resistance change rate within 10% (actual value)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified
• The use of special inside termination contribute to high performance of anti-sulfuration.

• Load life in Humidity is much better than conventional chip resistors. Long time stability ±0.2%
• The use of special inside termination contribute to high performance of anti-sulfuration.
• Tolerance on rated resistance ±0.1%
• TCR±50ppm/℃（±25ppm/℃ is available depending on resistance value）
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Guaranteed 0603 size 0.3W, 0805 size 0.5W
• ±0.5 resistance tolerance is in lineup.
• ESD (new JASO condition) 15KV is applied, resistance change rate within 10% (actual value)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified
• The use of special inside termination contribute to high performance of anti-sulfuration.

• Improved rated power compared to conventional wide terminal products 1220 size 0.8W、1632 size 1.25W
• The use of special inside termination contribute to high performance of anti-sulfuration.
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Guaranteed low resistance value 10mΩ and rated power 1.0W
• The use of a wide terminal type improves heat dissipation compared to short terminal type.
• The use of special termination contribute to high performance of anti-sulfuration.
• Also guaranteed ±0.5% (resistance value on request)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• The use of a wide terminal type significantly improves the reliability of solder joints compared to short-side electrodes.
• Improved heat dissipation compared to short terminal type due to the long side electrodes.
• Improved anti-surge characteristics compared to the conventional long-side electrode product (RPW18)
• The use of special inside termination contribute to high performance of anti-sulfuration.
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Improved rated power compared to conventional wide terminal products 1220 size 0.8W、1632 size 1.25W
• The use of special inside termination contribute to high performance of anti-sulfuration.
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Guaranteed 0603 size 0.3W, 0805 size 0.5W
• ±0.5 resistance tolerance is in lineup.
• ESD (new JASO condition) 15KV is applied, resistance change rate within 10% (actual value)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified
• The use of special inside termination contribute to high performance of anti-sulfuration.

• Guaranteed low resistance value 10mΩ and rated power 1.0W
• The use of a wide terminal type improves heat dissipation compared to short terminal type.
• The use of special termination contribute to high performance of anti-sulfuration.
• Also guaranteed ±0.5% (resistance value on request)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Load life in Humidity is much better than conventional chip resistors. Long time stability ±0.2%
• The use of special inside termination contribute to high performance of anti-sulfuration.
• Tolerance on rated resistance ±0.1%
• TCR±50ppm/℃（±25ppm/℃ is available depending on resistance value）
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Guaranteed 0603 size 0.3W, 0805 size 0.5W
• ±0.5 resistance tolerance is in lineup.
• ESD (new JASO condition) 15KV is applied, resistance change rate within 10% (actual value)
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified
• The use of special inside termination contribute to high performance of anti-sulfuration.

• The use of a wide terminal type significantly improves the reliability of solder joints compared to short-side electrodes.
• Improved heat dissipation compared to short terminal type due to the long side electrodes.
• Improved anti-surge characteristics compared to the conventional long-side electrode product (RPW18)
• The use of special inside termination contribute to high performance of anti-sulfuration.
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Lineups from resistance tolerance ±0.5% to ±0.1%
• The use of special inside termination contribute to high performance of anti-sulfuration.
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

Special plated products are suggested for wire bonding or mounting with conductive adhesives, other than solder mounting and chip resistors that work with high power even in high temperature environments.

• High reliability metal thick film
• The use of special inside termination contribute to high performance of anti-sulfuration.
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• This product is Jumper chip (0Ω).
• The use of special termination contribute to high performance of anti-sulfuration.
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• 0805 size 0.25W
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified
• The use of special inside termination contribute to high performance of anti-sulfuration.

• Guaranteed 0805 size 0.25W
• The use of special inside termination contribute to high performance of anti-sulfuration.
• ±0.5 resistance tolerance is in lineup.
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified

• Lineup from 0.1Ω low resistance value
• The use of special inside termination contribute to high performance of anti-sulfuration.
• RoHS qualified
• ELV qualified
• AEC-Q200 qualified